A solenoid valve is a type of electrically operated valve that uses an electromagnet to control the flow of a fluid through it. The electromagnet is powered by an electrical current, which causes the valve to open or close.
When should you clean a purge valve?
Purge valves should be cleaned every 6 months or when the valve becomes clogged.
How To Clean Purge Solenoid Valve
Here are 5 steps on how to clean purge solenoid valve:
1. Disconnect the power supply
First, you will need to disconnect the power supply to your heating system. You should turn off the circuit breaker in your home’s electrical panel, or turn off the fuse for that circuit.
2. Remove the plug from the solenoid valve and clean it with a wire brush or similar tool.
Clean the plug with a wire brush or similar tool. This will remove any corrosion that may have built up on the plug and ensure that it is making a good connection to your heating system.
3. Clean the inside of the valve with a wire brush or similar tool.
Clean the inside of the valve with a wire brush or similar tool. This will remove any corrosion that may have built up on the inside of your heating system and ensure that it is making a good connection to your heating system.
4. Clean the outside of the valve with a wire brush or similar tool.
Clean the outside of the valve with a wire brush or similar tool. This will remove any corrosion that may have built up on your heating system and ensure that it is making a good connection to your heating system.
5. Reconnect power supply
Once the inside and outside of the valve are clean, you can reconnect the power supply to your heating system. You should turn on the circuit breaker in your home’s electrical panel, or turn on the fuse for that circuit.
Frequently Asked Questions
Can you fix a purge valve yourself?
It is possible to fix a purge valve yourself. Depending on the severity of the problem, you may be able to clean or replace the valve.
How long does purge valve last?
The purge valve is designed to last the life of the furnace.
What is the purpose of the purge valve?
Purge valves are used to remove air from an air conditioning system when it is turned off, for example, at night. This prevents moisture from forming in the refrigerant lines and causing damage to other equipment inside your home.
When should you purge a solenoid valve?
Solenoid valves should be purged before the first use and periodically thereafter. This is especially important for solenoids that are used in applications where there will be a lot of water flow, such as a swimming pool or fountain. If the solenoid valve is not purged, it could get stuck when you activate it, causing damage to the solenoid and your equipment.
