How To Replace Two Handle Shower Valve - SIO

How To Replace Two Handle Shower Valve

Home How To Replace Two Handle Shower Valve
13/10/2022
Share:

When your shower valve starts to leak, it can be a pain to fix. This tutorial will show you how to replace a two handle shower valve in just a few steps. Replacing the shower valve is much cheaper and easier than calling a plumber, so follow these steps and get started today!

How To Replace Two Handle Shower Valve

First, you’ll need to turn off the water to the shower. Next, remove the handles and escutcheons (the decorative plates that cover the holes in the wall). Once the escutcheons are off, you’ll be able to see the valve stems. Use a wrench to remove the packing nuts that secure the valve stems in place. At this point, you should be able to pull out the old valve.

Now it’s time to install the new valve. Start by threading the new valve into place, then secure it with packing nuts. Next, attach the escutcheons and handles. Finally, turn on the water and test the new valve to make sure it’s working properly. If all goes well, you should now have a brand new two-handle shower valve that will provide years of trouble-free service.

How do you fix a leaky shower with two handles?

A dripping shower can be annoying and wasteful, not to mention it can also add to your water bill. If you have a shower with two handles, it is most likely that the issue is with the diverter. The diverter is responsible for directing the water flow from the tub spout to the showerhead.

Over time, the rubber seals inside the diverter can deteriorate, causing leaks. Luckily, this is a relatively easy problem to fix.

First, you will need to remove the handles and escutcheons (the decorative plates around the handles). Then, unscrew the diverter and remove any old seals or gaskets. Once you have cleaned out the diverter, you can install new seals and gaskets before screwing it back into place. Finally, reattach the handles and escutcheons, and you should have a leak-free shower once again!

How do two handle shower valves work?

While a single handle shower valve only controls the temperature, a double handle shower valve will also control the water pressure. This is accomplished by having one handle that controls the hot water and another that controls the cold water.

By turning both handles at the same time, you can increase or decrease the amount of water pressure coming out of the showerhead. The reason that two handle shower valves are more commonly used is because they provide greater control over both the temperature and pressure of the water.

This can be beneficial if you have children or elderly family members who need to take showers, as it can help to prevent scalding. Additionally, two handle shower valves are often less expensive than their single handle counterparts. As a result, they are a great option for those on a budget.

How do I know what kind of shower valve I have?

There are three main types of shower valves: compression, cartridge, and ceramic disc. Each type has its own advantages and disadvantages, so it’s important to choose the right one for your needs.

Compression valves are the most common type of valve, and they’re typically very durable and easy to repair.

Cartridge valves are less common, but they’re often more expensive and may require more frequent replacement.

Ceramic disc valves are the newest type of valve on the market, and they offer a number of advantages over other types of valves. They’re more expensive than both compression and cartridge valves, but they’re also much more durable and require less maintenance. If you’re not sure which type of valve you have, your best bet is to consult a plumber or another professional for help.

 

Copyright© 2019 Ninbo SIO Fluid Equipment Co., Ltd. All Rights Reserved.