If your shower isn’t working quite right, it might be because the diverter valve is broken. In this post, we’ll show you how to replace the diverter valve in your shower so that you can get back to enjoying a hot shower! Replacing the diverter valve is a pretty easy job, and it only takes a little bit of time and effort. So if your shower has been giving you trouble, follow these steps to fix it!
How To Replace A Shower Diverter Valve
- Turn off the water supply to the shower.
- Remove the old diverter valve (it will be a plastic or metal plate with a hole in it and a screw on either side).
- Take out the old diverter valve stem (the part that sticks out of your wall). You may need a special tool for this, depending on your type of shower valve. If you don’t have one, try using pliers or channel locks to remove it.
- Install the new diverter valve stem by screwing it back into place with your hand, then tighten it with pliers or channel locks until it is secure but not overly tight.
- Attach the shower head to the new diverter valve stem by screwing it on by hand and tightening it further with pliers or channel locks until it is secure but not overly tight.
- Turn on the water supply to test that everything works correctly before tiling over your new diverter valve installation area!
Do you need to turn off water to replace shower diverter?
If your shower diverter is leaking or not working properly, you may be wondering if you need to turn off the water to replace it. The answer depends on the type of diverter you have. If you have a shower diverter valve that controls the water flow to the shower head and tub faucet, then you will need to turn off the water to the entire house before replacing it.
However, if you have a single-lever shower diverter that only controls the water flow to the shower head, then you should be able to replace it without turning off the water. In either case, it’s always a good idea to shut off the power to your bathroom before starting any plumbing work.
Can you replace a diverter valve?
At some point, every homeowner will have to deal with a plumbing issue. A leaky faucet, a clogged drain, or a broken pipe can all be frustrating problems. However, there is one type of repair that is particularly challenging: replacing a diverter valve. Diverter valves are used to redirect water from the tub spout to the showerhead, and they are located behind the tub wall.
As a result, replacing a diverter valve requires removing the tub spout and accessing the valve through the wall. While this may sound like a daunting task, it is actually not as difficult as it seems. With a few tools and a little patience, most homeowners can successfully replace a diverter valve on their own.
Of course, if you are not feeling confident about tackling this repair, you can always call a plumber. Either way, you will be glad to have your shower back in working order.
How do you fix a broken shower diverter?
A broken shower diverter can be a frustrating problem. If you’re lucky, it might just be a clogged diverter valve. However, if the valve is damaged, you’ll need to replace it. Luckily, this is a relatively easy task that can be completed in a few simple steps. First, turn off the water to your shower.
Next, remove the old diverter valve by unscrewing it from the wall. Be careful not to damage the surrounding area when removing the old valve. Once it’s been removed, clean out any debris from the hole before installing the new valve. Then, simply screw the new valve into place and turn on the water. With any luck, your shower will be up and running in no time!
