There is a global demand for industrial valves. Rapid industrialization in Asia increases the number of valve manufacturers in China and India. With the rising production of oil and gas in the Middle East sees the rise of valve suppliers in UAE.
These regions are not the only players in the global industrial valve industry. The European valve market is wide and mature. Most of the manufacturers are found in Italy, the UK, and Germany. This article lists the top valve manufacturers in Europe so you can decide easily which valve manufacture is more suitable for your industrial applications.
Table of Contents
Gate Valve Manufacturers in Europe
Gate valves are one of the most common industrial valve types found in a process plant. Gate valves are linear motion valves that isolate media. Gate valves should be used in a fully open or fully closed position. Since their gate discs do not hinder the flow in the open position, gate valves offer very little pressure drops.
Gate valves can be classified according to the disk type. This can be of solid taper wedge, the flexible wedge or split wedge. Gate valves can also be classified according to the type of bonnet. These bonnets can be screwed, welded or pressure-sealed.
AKO Armaturen & Separationstechnik GmbH
AKO has several manufacturing plants across Europe. ISO 9001: 2015 certified, AKO many types of pinch valves, pressure relief valves, knife gate valves, and pipe manometers, among others. AKO is engaged in agricultural technology, farming, chemical industry, glass processing, mining, plastics, food and beverage, and pharmaceutical industries.
AKO knife gate valves are unidirectional. The valve widths of these valves range from DN 50 to DN 1200. There are three kinds of AKO knife valves. Type A is a manually actuated handwheel mode that comes with rising or non-rising stem. This type is made either of gray cast iron or stainless steel. Type is suitable for general industrial applications.
Type B is suited for thicker media. This kind of knife valve is made of a two-part body with a wafer disk. To keep the body together, this valve is screwed together with reinforced ribs. This can be made of gray cast iron os stainless steel which can have UHMW polyethylene sliding strips for ease of opening and closing. Type C is suitable for powdered and granular products. This type can either have single or double-acting pneumatic spring cylinders and electric actuators.
Control Valves Manufacturers in Europe
Control valves are divided into 2 classes: the linear motion kind and the rotary motion ones. The linear motion type moves in a linear motion when opening or closing the valve. Linear motion valves include the globe valve, the gate valve, the diaphragm valve, and the pinch valve.
Rotary motion control valves are characterized by a rotatory motion when opening or closing the valve. Examples of the rotary control valves are the ball valve, the butterfly valve, and the plug valve.
Guichon Valves
Guichon Valves is one of the valve manufacturing companies in Europe that has made a mark in the custom-made valve market sector. A subsidiary of the Valco Group, Guichon Valves is ISO 9001: 2008 certified. Its control valve is used for liquids, gases, and slurries.
Guichon control valves can range from DN 25 to DN 300. It can have diameters from 1 inch to 12 inches. Depending on size, it can be BN 10 to BN 250 and an operating pressure range from 150 lbs to 1500 lbs. These valves can be made of Carbon Steel (CS), Stainless Steel (SS), Duplex & Super Duplex, Inconel & Incoloy®, Titanium, Zirconium, Uranus® B6, Tantalum, Nickel, Hastelloy®, Monel.
Guichon control valves have a metal to metal or PTFE sealing system. Its closing operation can range from the double-acting pneumatic actuator, single-acting pneumatic actuator, electric motor, and air motor. These valves have removable seats, a heating jacket, and a fire-safe design.
Butterfly Valve Manufacturers in Europe
Butterfly valves are rotary valves that are often used to isolate, regulate, or start the flow of media. Butterfly valves are often used when a tight sealing is needed in valves with large diameters. Butterfly valves are also used when space is an issue or when media is viscous and thick.
Butterfly valve bodies can either be a wafer type or the lug type. Between the two, the wafer type is more economical. This type is fits between two pipe flanges. The lug type, on the other hand, is held by bolts on the pipe flanges and passes through the holes of the outer casing of the valve.
Sirca
Sirca is an Italian industrial valve manufacturer that has been in the business for more than 40 years. This company is an ISO 9001: 2015 certified. It engages in several industries including the energy sector, the water sector, the marine sector, and other industrial sectors. The company offers several types of industrial valves including butterfly valves, ball valves, and actuators.
Sirca offers 7 types of butterfly valves which could have sizes ranging from 1 ½ inch to 56 inches with flange drilling with ANSI Class 150 pressure rating. Sirca butterfly standard materials are Ductile Iron, Carbon Steel, Stainless Steel, Al/Bronze and. Its stem can be made of AISI 316, AISI 420, AISI 630, MONEL K. Its seats can be customized in NBR, EPDM, EPDM HT, VITON, and more. These valves follow the 2014/68/UE PED, 2014/34/UE ATEX, SIL IEC 61508 – IEC 61511 GOST-R, CU TR 10 – CU TR 32 and TA-Luft standards.
Ball Valve Manufacturers in Europe
Ball valves are quarter-turn isolation valves. While ball valves have throttling capacity, these valves are not used as such. Ball valves are used for shutoff or turn on the valve to allow or prohibit the flow of media.
There are four types of ball valve body styles. These are the single body, the split body, the top entry, and the welded body. Ball valves can also be classified according to the configuration of the ball disc. A ball valve can have a floating ball disc or it can have a trunnion-mounted ball disc.
Böhmer Ball Valves
For the past 60 years, Bohmer has been manufacturing high-quality ball valves in its two manufacturing plants in Germany. Bohmer produces 4 types of ball valve types. Its fully welded ball valve sizes range from DN3 to DN1800 with pressure ranges from PN 10 to PN 800 or ANSI Class 150 to ANSI Class 2500. Its pressure working temperature is between -180 degrees Celsius to 650 degrees Celsius.
The split-body ball valve can have sized from DN 3 to DN 1400. This valve can have a pressure range of PN 10 to PN 800 and a working temperature range from -180 degrees Celsius to 650 degrees Celsius. The buried ball valve is suitable for underground pipelines. These valves can range from PN 10 to PN 800 with sizes ranging from DN 3 to DN 1400. It also has a working temperature of -180 degrees Celsius to 650 degrees Celsius. Lastly, the multiway ball valve has three to four passages with up to DN 100 size. These valves can either have the T-, L- or X- configurations.
Solenoid Valve Manufacturers in Europe
Solenoid valves are powered by a solenoid, an electric coil with a magnetic center. When turned on, an electric current passes through the coil and creates a magnetic field. This force pulls the plunger towards the coil, thereby opening the valve. When it is time to close, the solenoid valve simply releases that electromagnetic force previously acting upon the coil.
Solenoid valves are often used in liquid or gas circuits such as heating systems, compressed air technology, irrigation systems, and the likes. Solenoid valves have four main types. These are the direct-acting type, the pilot-operated solenoid valves, the two-way type, the three-way type, and the four-way type.
ASCO/Emerson
ASCO is a subsidiary of Emerson, a leading global engineering and technology manufacturing company. It offers several industrial products including solenoid valves. Its solenoid valve line is used in general services, fuel, oil and gas industries. ASCO solenoid valve sizes range from ⅛ inches to 6 inches. These valves can be made of engineering plastics, brass, light alloy, stainless steel, and aluminum. Depending on the design, ASCO valves can be normally open or normally closed.
Pressure Relief Valves Manufacturers in Europe
Pressure relief valves are emergency systems that relieve a pressurized vessel or piping system of excess pressure. Depending on the design and construction, pressure relief valves are classified as safety relief valves, relief valves, and safety valves. Pressure relief valves are often actuated by internal pressure. This kind of valve would only open in conditions when there is more pressure than the set pressure.
Leser
Leser pressure relief valves are designed according to the API standards. This pressure valve product line is known for the 50% tighter capacity than what is required by API 527. The valve size for this product line is between DN 25 to DN 200 or from 1 inch to 8 inches. Its actual orifice diameter is between 0.551 in – 6.36 in. Leser pressure valves have a working pressure capacity between 0.12 bar – 413.7 bar, and a temperature range between -268 °C bis 538 °C. The load type is spring-loaded.
Summary
Europe produces supremely efficient and highly reliable industrial valves. European valve manufacturing companies are one of the best in the world. We have provided you a list of the best ones in Europe. Do you think we missed something? Tell us in the comment below.
